Report From Product Control - RADWAG UYA 3Y User Manual

Messages displayed during a control process:
Batch quantity 1
/ 10
Product
Average
Standard
deviation
After completing the control process, the software generates a report, a the
completed control is automatically saved in the corresponding database.
Caution:
A template and an example of a report from a control process is provided in
point 26.7 of this user manual.

26.4. Report from product control

An example of a report:
----------------- SQC ------------------
User
Product
Start date 2012.10.19 12:27:09
End date 2012.10.19 12:37:20
Batch number
Batch quantity
Nominal mass
Limit T2-
Limit T1-
Limit T1+
Limit T2+
--------- Measurement 1 --------------
Net 49.998 g
--------- Measurement 2 --------------
Net 49.998 g
--------- Measurement 3 --------------
Net 50.021 g
---------Measurement 4 ---------------
Net 50.038 g
---------Measurement 5 ---------------
- A command on process course and the quantity
of all measurements in a tested batch
- Name of the controlled product
- Average mass of the controlled product
- Standard deviation from a controlled batch
000
ppp
10
50 g
5 g 10 %
2.5 g 5 %
1 g 2 %
2 g 4 %
- 122 -