Profiles - RADWAG UYA 3Y User Manual

Non-standard printout
Non-standard printout

a printout may contain: TEXTS and VARIABLES (which are acquired from
the software on printout).
Each non-standard printout is a separate project, featuring specific name,
by which it is identified, and saved in the database of printouts.
PROCEDURE:
1. Press option <Non-standard printout>
2. Press <Add>
3. A window is opened with a message <Create new record?>
4. On accepting, a new window is opened with the following data:
Name/Code/Project
5. Set name and code of a printout
6. Press <Project> key
7. A keyboard is opened on the display for editing the printout
8. Use keyboard to design printout template, the printout may contain
texts and variables.
Caution:
User can add a printout by importing configured texts from data storage devices

connected to balance's USB port.
Printout's name is ONLY a NAME, and it is not part of its content.

Means of designing a non-standard printout template is described in point 24.11

<Printouts> of this user manual

15.6. Profiles

Profiles are described in point 14. Profiles of this user manual.
key
- 55 -