Percent Setup - RADWAG UYA 3Y User Manual

19. PERCENT SETUP

Working mode <
reference mass (standard). The process is expressed in percent [%].
Additionally, the percent setup process can be aided by DOSING and
CHECKWEIGHING processes. The supplementary modes and a bargraph are
not enabled automatically.
Working mode activating procedure
while in the main window, press
•
display, which opens a submenu <Working modes> with selection of
available working modes,
select <
•
main window and displays
The grey coloured workspace contains the following data:
o Supplementary unit
o Gross
o Reference mass (standard)
o Low threshold – percent [%] value of the Reference Mass (Standard)
o High threshold – percent [%] value of the Reference Mass (Standard)
On selecting the percent setup mode the display contains the
following quick access keys in the bottom bar:
1. Setup – access to balance's menu
2. Print header – print of data declared in the header
3. Print footer – print of data declared in the footer
4. Database of products – selection of products from corresponding
database
5. Percent setup: set reference mass (standard)
6. Percent setup: set as 100 %
Percent setup> enables comparing weighed load to a
Percent setup> mode, the software automatically returns to the
soft key located in the upper bar of the
pictogram in the upper bar.
- 68 -