Setting Of Animal Weighing Mode; Additional Settings Of Animal Weighing Mode - RADWAG UYA 3Y User Manual

21.1. Setting of animal weighing mode

Depending on required mass analysis of weighed object, the balance enables
setting internal criteria of the function.
PROCEDURE:
1. press <
2. the display indicates option referring to this working mode, such as:
Averaging time
Amount of time during which measurement records of weighed sample
are analyzed. Obtained data is used to determine measurement result.
Automatic operation
Determines start criterion for measurements: whether they are
initiated manually /on pressing a key/ or automatically.
A measurement starts automatically if indication on balance's display
exceed the value of set threshold.
The following measurement can start on unloading the weighed object
from balance's pan (the indication has to return below the value set in
threshold), loading a new object on balance's pan and exceeding the
threshold's value by the indication.
Threshold
It is a value expressed in mass measuring units.
in order to start measurement, the indication has to exceed value set in
the threshold.
3. set mode's operating parameters and return to weighing,
4. load weighed object on balance's weighing pan and press <
5. on completing the measurement, the display indicates and "locks" the
measurement result,
6. the following measurement is carried out on pressing <
- in case of manual operation mode, press <
- in case of automatic operation mode, unload weighed object from the
weighing pan and load the following object to be weighed.

21.2. Additional settings of animal weighing mode

The additional settings enable adjusting the working mode to user's needs and
requirements. To access the setting follow below procedure:
Procedure:
1. Press grey coloured workspace,
2. Press menu <Settings>,
3. The display indicates functions related to checkweighing, such as:
− Result control
Animal weighing > key,
- 82 -
> key,
> key:
> key,