Working Mode Activating Procedure - RADWAG UYA 3Y User Manual

26.1. Working mode activating procedure

Procedure:
while in the main window, press
•
display, which opens a submenu <Working modes> with selection of
available working modes,
select < SQC>, mode, the software automatically returns to the main
•
window and displays
Simultaneously, the message bar displays a command <Start control > and
•
a soft-key on control start is visible in the bottom tool bar:
Start control
Control start procedure:
Starting a control process requires logging a user with corresponding access
•
level.
Caution:
Starting a control requires that an access level of the logged user is at
1.
least a <user>. If a logged user or an anonymous user have access level
set to <guest> then on control start the software opens a message box
informing on: <Unauthorized access>.
Logging procedure is described in point 9 of this user manual, and
2.
procedure determining access level for each user is provided in point 13 of
this user manual.
Set general settings of working mode parameters to balance memory
•
< SQC>, description in point 26.2,
Select a needed product (by pressing a corresponding soft key
< > in the bottom bar or using balance's keyboard with correctly determined
data on a control:
soft key located in the upper bar of the
pictogram in the upper bar,
- 119 -