Density - RADWAG UYA 3Y User Manual

20. DENSITY

Working mode <
one is used to determine density of solids, the second is for the density of
liquids, and the third one determines density of air. The third module is
available in balances AS 3Y, XA 3Y and MYA 3Y series.
Carrying out the density procedures requires installing an optional density kit
(additional equipment) appropriate to a model of used balance.
Working mode activating procedure
while in the main window, press
•
display, which opens a submenu <Working modes> with selection of
available working modes,
select <
•
main window and displays
The grey coloured workspace contains the following data:
o Procedure
o Weighing 1
o Weighing 2
o Standard liquid
o Temperature
o Density of standard liquid
On selecting the density mode the display contains the following quick
access keys in the bottom bar:
1. Setup – access to balance's menu
2. Print header – print of data declared in the header
3. Print footer – print of data declared in the footer
4. Database of products – selection of products from corresponding database
5. Density of solid
6. Density of liquid
Density > features three separate modules. The first
Density> mode, the software automatically returns to the
soft key located in the upper bar of the
pictogram in the upper bar.
Solids
Water
o
22 C
3
0.9978 g/cm
- 72 -