Checkweighing - RADWAG UYA 3Y User Manual

17. CHECKWEIGHING

Working mode <
using two threshold (Low and High). Usually it is accepted, that mass
indication is correct if it is included within the thresholds' values.
Working mode activating procedure
while in the main window, press
•
display, which opens a submenu <Working modes> with selection of
available working modes,
select <
•
the main window and displays
The grey coloured workspace contains the following data:
o Supplementary unit
o Low threshold
o High threshold
o Difference – denoting the "distance" of current measurement result from
the center of Lo-Hi section
On selecting the checkweighing mode the display contains the
following quick access keys in the bottom bar:
1. Setup – access to balance's menu
2. Print header – print of data declared in the header
3. Print footer – print of data declared in the footer
4. Database of products – selection of products from corresponding
database
5. Set tare – field for setting numeric value of tare
6. Checkweighing thresholds – for declaring the values of Low and High
threshold
Checkweighing > enables controlling sample mass
Checkweighing> mode, the software automatically returns to
soft key located in the upper bar of the
pictogram in the upper bar.
- 63 -