Average Tares - RADWAG UYA 3Y User Manual

Control number format:
X / y y / M M / d d / H H / m m, where:
X - control type which takes the following values:
U – control regulated by the act,
Z – control completed by a user,
yy – year of control end,
MM – month of control end,
dd – day of control end,
HH – hour of control end,
mm – minute of control end.
Balance user can preview data on each control.
Procedure
• Enter submenu <
manual,
• Enter <
List of parameters defined for a control:
1. Batch number
2. Result
3. Start date
4. End date
5. Product
6. User
7. Average
8. Average limit
9. Standard deviation
10. Quantity
11. No. of measurements

27.11. Average tares

Before starting a <Non-destructive average tare> control it is possible to
determine the average tare value by weighing the packages. Each of above
processes is automatically saved in the <
control saved in the database on determining average tare value features its
specific number set at the moment of its completion.
Databases> in accordance with point 27 of this user
Controls> database and select a desired control record.
(function not available in standard balance version)
[batch no. of a controlled product]
[status (result) of a control]
[date of control start]
[date of control end]
[name of a controlled product]
[name of a user carrying out the control]
[average value from carried out
measurements]
[average disqualifying value]
[average standard deviation]
[the value batch quantity (batch size) for
which the software accepts the size of
tested sample in accordance with the
regulation]
[no. of completed measurements]
Average tare> database. Each
- 140 -