Interpreting The Function By Use Of A Bargraph; Additional Settings Of Percent Setup Mode - RADWAG UYA 3Y User Manual

3. If tolerance applies, set its value,
4. Accept by pressing <
5. Press High Threshold key and insert its value in [%],
6. Accept by pressing <

19.3. Interpreting the function by use of a bargraph

The dosing and checkweighing functions are aided by graphic indication, in a
form of a bargraph. Below see an example of simultaneous operation of the
two functions.
a) checkweighing thresholds <
High Threshold = 110%
b) Target value = 105% ; tolerance = 5% <
c) Reference mass = 19.986 g <

19.4. Additional settings of Percent Setup mode

The additional settings enable adjusting the working mode to user's needs and
requirements. Functions related to checkweighing: result control, tare mode,
automatic footer printout, printout mode / value release, printouts.
Means of using the above functions are given in point 10.8. "Additional
parameters on weighing process".
> key,
> key
> are set as Low Threshold = 90%,
>
- 71 -
>