Table of Contents
Advertisement
On previewing a specific weighing, a window is opened with data and values on
the weighing process. Numbers displayed next to weighing data <B> denote
measuring cycles.
Data on a specific series can be printed or exported to a file.
25.5. Copy tare
The option enables copying once selected tare value in a series to all samples
which do not have tare value assigned, and for which differential weighing
process (status other than Weighing B) is not completed.
Means of operation:
Press key
Which displays list of samples for which
tare value is assigned.
Press tare value that should apply to
other samples in a series (which do not
have tare applied).
The software automatically applies
selected tare value to data of these
samples.
25.6. Using option "SAMPLE SELECTION"
The option enables selecting a sample that is prepared for weighing, with no
need to weigh samples is a sequence as suggested by the software. The option is
available only after initiating a given process.
Means of operation:
While in differential weighing mode, on selecting a series, press procedure
selecting key, e.g. <Weighing A>.
Then press the following key:
- 115 -
Advertisement
Chapters
Table of Contents
