29.5. Barcode scanners
The balance enables cooperating with barcode scanners, which are used to
quick searching for a product in the database of products. Connection to a
barcode scanner is configured in submenu <
Available options:
Setting communication port with a barcode scanner,
•
Offset setting,
•
Setting barcode length.
•
Caution:
Submenu <
Communication> requires setting baud rate to compatible with the
one used barcode scanner (default 9600b/s). Detailed description of communicating
the balance with a barcode scanner is provided in APPENDIX F of this user manual.
The balance enables communicating with a barcode scanner using the
following ports:
RS 232 (COM1),
•
RS 232 (COM2),
•
Offset
Setting the first data carrying character of a barcode, which is the first
recognized character while searching for a product.
Code length
Setting number of characters recognized during searching for a product.
29.6. Transponder card scanner
Selecting (logging) a user on each switching on the balance can be carried out
by means of:
Inserting user's password using on-screen keyboard,
•
With a transponder card scanner, by approximating a registered card to the
•
scanner.
Caution:
For correct balance's cooperation with a transponder card scanner set appropriate
baud rate value in submenu <
Transponder card scanner port.
The balance enables communicating with a transponder card scanner using
the following ports:
RS 232 (COM1),
•
RS 232 (COM2).
•
Assigning number of a card to a user:
Barcode Scanner>.
Communication> (default 9600b/s).
- 154 -