Weighing; Selection Of Measuring Unit - RADWAG UYA 3Y User Manual

10. WEIGHING

Load a weighed object on balance's weighing pan. On stabilization of weighing
result, indicated by stability marker
read the measurement result.
Saving / printout of the measurement result is available on pressing <PRINT>
key:
• In case of verified balances – only stable measurement result can be
saved or printed (stability marker
• In case of non-verified balances – stable or unstable measurement
result can be saved or printed (regardless of stability marker
presence). If unstable measurement result is printed then it is
accompanied by question mark <?> in front of printed mass value.

10.1. Selection of measuring unit

Change of measuring unit is carried out by pressing the measuring unit icon
visible next to the value of measurement result on balance's display. Pressing
the measuring unit icon opens a list with available units. On selecting one of
them, the software automatically calculates the indicated mass value to the
active measuring unit.
Available measuring units:
Unit
gram
milligram
kilogram
carat
pound
ounce
ounce Troy
pennyweight
Taele Hongkong
Taele Singapur
Taele Tajwan
Momme
Grain
Newton
Tical
visible on the side of balance's display,
visible on balance's display)
denotation
[g]
[mg]
[kg]
[ct]
[lb]
[oz]
[ozt]
[dwt]
[tlh]
[tls]
[tlt]
[mom]
[gr]
[N]
[ti]
- 27 -
Verified
balance
yes
yes *
yes *
yes *
no
no
no
no
no
no
no
no
no
no
no