Tcp Protocol Settings; Peripheral Devices; Computer - RADWAG UYA 3Y User Manual

28.5. TCP protocol settings

TCP, i.e.
Transmission Control Protocol
The TCP operates in client-server mode. The server pends for establishing a
connection on a specified port, and the client establishes connection with a
server.
Procedure of setting a port for "TCP" protocol:
Enter group of parameters <
−
Select: „
−
keyboard,
Insert required port number and accept by pressing
−

29. PERIPHERAL DEVICES

Menu PERIPHERAL DEVICES is located in menu group Parameters. It is
accessed by pressing Setup key or <
menu, there is a list of connectable peripheral devices, which can cooperate
with a balance.

29.3. Computer

Active connection between a balance and a computer is signaled by visible
pictogram displayed in the upper bar of the main window. Submenu <
Computer> enables configuring connection settings.
Procedure:
− press
− set balance's parameters related to cooperation with a computer
− computer port
o available options: none, COM 1, COM 2, Tcp
− address
o give address of a balance which is connected to a computer
− continuous transmission
o available options: NO, YES (printout format depends on set
printout template in a balance – see next parameter).
− weighing printout template
o it is possible to design an individual printout to a computer using a
dedicated window with printout template. Principles on creating
printouts are described in point 24.11 of this user manual.
− E2R System
o E2R System is a modular system performing complex operations of
supervision and control over all weighing processes carried out on
a balance.
Caution:
Enabling parameter <
manufacturer or authorized personnel.
Tcp / Port" which opens a window <Port> with on-screen
key and "
E2R System> can only be carried out by balance
enables communicating two computers.
Communication>,
Setup > quick access key. Inside the
Peripheral devices /
- 152 -
key.
Computer" key