Use Of Database Of Products In Dosing Process - RADWAG UYA 3Y User Manual

18.1. Use of database of products in dosing process

When weighing, it is possible to use the value of target mass assigned to a
product in the database of products or temporarily determine custom target
values of mass. In the database of products, target mass of a product is its
mass field.
PROCEDURE 1 – Selection of product from Database of Products
Press < Database of Products> quick access key
•
Using list of products select one to be weighed
•
Automatically, in the grey workspace the target value and the tolerance
•
value are displayed
The display indicates the negative value of the target value
•
Under the measurement result there is bargraph displayed. Colour of the
•
bargraph corresponds to the current status of mass :
Yellow bargraph's colour: mass value below the Target Value –
o
Tolerance
Green bargraph's colour: mass value within the tolerance field: Target
o
Value +/- Tolerance
Red bargraph's colour: mass above the Target Value + Tolerance
o
PROCEDURE 2 – manual inserting the value of target mass
Press <
•
In an opened window give the target value and tolerance
•
Return to weighing
•
Target value > quick access key
- 66 -