Pipettes - RADWAG UYA 3Y User Manual

Control number format:
X / y y / M M / d d / H H / m m, T where:
X - control type which takes the following values:
U – control regulated by the act,
Z – control completed by a user,
yy – year of control end,
MM – month of control end,
dd – day of control end,
HH – hour of control end,
mm – minute of control end,
T – control with determining the average tare value.
Balance user can preview data on each process of average tare determination.
Procedure
• Enter submenu <
manual,
• Enter <
List of parameters defined for a control:
1. Product
2. Status
3. Date
4. Tare
5. S
6. 0,25 T1
7. No. of measurements
8. User

27.12. Pipettes

Database of Pipettes contains records and specification on pipettes to be
calibrated.
Procedure
Enter submenu <
•
Press <
•
If a pipette already exists in the database of pipettes, press field with its
•
name to enter its specification which is optionally configurable.
Databases> in accordance with point 27 of this user
Average tare> database and select a desired record.
Databases>, and press <
Add > soft key should a new pipette be added,
[name of a product which packaging is
checked for average tare determining
process]
[status (result) of a process]
[date of carried out process]
[determined value of packaging tare]
[average standard deviation]
[the value of a criterion for process
result]
[Number of completed measurements of
tare value]
[name of a user carrying out the process]
- 141 -
Pipettes> field