Using Formulas In Weighing - RADWAG UYA 3Y User Manual

On selecting adding of a new formulation, the software automatically adds a new
entry in the database, and enters its editing mode. Insert all parameters of a
new formulation.
List of parameters defined for a formulation:
1. Name: press "Name" field, a window opens for inserting name of a
formulation,
2. Code: for inserting formulation code
3. Ingredients: press "Ingredients' field, a window opens with a list of
ingredients used in a formulation (in case of a new formulation, the list
of ingredients is empty), add new ingredients to a formulation:
• Press <
• Select one of available options:
<New ingredient> - adding a product, which is absent in the database
of products. On selecting this option, first insert a name of a new
product, then specify its mass to be weighed during formula making
process. The software automatically adds the products to the database of
products.
Caution: after adding the product, balance user can fill in other data on a
product from the database level.
<New ingredient from database> - on selecting this option, a window
with the Database of Products is opened. Using displayed list select a
product to be weighed in the mixture, mass to be weighed is the mass of
the product saved in its record in the database.
The value of mass of each added product is editable. Changing mass of
an ingredient in a formula does not immediately change product's mass
saved in the database.
4. Number of ingredients – non-editable option, it is updated by the
software on adding the following ingredient to a formulation.
5. Sum – target mass of a formulation, i.e. sum of all ingredients in a
formulation. It is not editable, and it is updated by the software on
adding the following ingredient to a formulation.

22.4. Using formulas in weighing

In activating FORMULATION mode, depending on settings, user can move to
formula making process either on selecting a formulation from corresponding
database or weigh a mixture "manually".
Preparing mixtures is carried out by:
− Preparing a formulation that is not saved in the Database of Formulas –
i.e. "manually",
− Preparing a formulation that is saved in the Database of Formulas,
Add > soft key
- 87 -