Es Cr Lf - Command Not Recognized (Incorrect Mass Format) - RADWAG UYA 3Y User Manual

Switch on continuous transmission in current measuring unit
Format: CU1 CR LF
Accessible responses:
CU1_I CR LF
CU1_A CR LF
MASS FRAME
Frame format:
1 2 3 4
stability
S U I
marker
Switch off continuous transmission in current weighing unit
Format: CU0 CR LF
Accessible responses:
CU0_I CR LF
CU0_A CR LF
Set low checkweighing threshold LO
DH_XXXXX CR LF, where XXXXX - mass format
Format:
Accessible responses:
DH_OK CR LF
ES CR LF
Set high checkweighing threshold HI
Format: UH_XXXXX CR LF, where XXXXX - mass format
Accessible responses:
UH_OK CR LF
ES CR LF
Give value of low checkweighing threshold LO
Format: ODH CR LF
Accessible response: DH_MASS CR LF - command carried out
Frame format:
1 2 3
D H space
- command understood but not accessible at this moment
- command understood and in progress
- response is mass value in current measuring unit
5 6
space character mass space
- command understood but not accessible at this moment
- command understood and in progress
- command carried out
- command not recognized (incorrect mass format)
- command carried out
- command not recognized (incorrect mass format)
4-12 13
mass space
7-15 16
14 15 16
unit
- 171 -
17 18 19 20 21
unit CR LF
17 18
space CR
19
LF