Additional Parameters On Weighing Process - RADWAG UYA 3Y User Manual

If a balance features both types of sensors (THB module and
internal sensor), then data from the THB module supersedes the
other. For correct balance cooperation with the THB module set
port's transmission parameters to compatible with those of the
THB module.
On returning to the weighing mode, the display indicates an additional symbol
!
< >, as indicated on below drawing. From now on the value of indicated mass
is corrected including the air buoyancy compensation factor and sample
density.
The measurement result can only be compensated by a correct value if an
operator inserts to balance's memory the actual value on the air density and
correct density of weighed sample.

10.8. Additional parameters on weighing process

Changes in settings of functions related to weighing process can in some
extend program balance reactions.
Procedure:
1. Press grey coloured workspace
2. Balance display indicates menu: Settings, Keys, Information, Printouts,
Profile
3. Press one of available submenu options and select item for modification,
Menu <Settings> - additional options related to weighing mode
Menu <Keys> - defining quick access keys
Menu <Information> - supplementary data on weighing process displayed in
the grey coloured workspace
Menu <Printouts> - selection of printout type
Menu <Profile> - selection of profile, active during balance operation
Menu <SETTINGS> - contains supplementary data on weighing process, such
as:
Tare mode
−
SINGLE,
•
mass value stored in balance memory on single pressing of TARE key, the
following pressing of TARE key determines new value of tare. Selection of
product or packaging with assigned tare value causes automatic deleting
of previously assigned tare value;
- 34 -