Comparison Of Sample And (Reference) Mass Standard - RADWAG UYA 3Y User Manual

19.1. Comparison of sample and (reference) mass standard

Comparison of samples with a mass standard can be carried out through:
− Giving mass of a standard, using <
− Accepting current mass loaded on the weighing pan as a reference
mass, using <
− Selecting a product from database of products, where parameter mass
of a product entry is defined, using <
key.
PROCEDURE 1 – manual declaration of reference mass
Press < Give reference mass > soft key
•
In an opened window type in value of reference mass and accept it by
•
pressing <
All weighed products are compared with the reference mass, and the
•
display indicates difference between weighed objects in [%].
PROCEDURE 2 – accepting currently loaded mass as reference (standard)
Place a sample on balance's weighing pan
•
On stabilization of measurement result press <
•
key
The display indicates 100.000%, mass is accepted as reference, and
•
automatically saved in (reference) mass standard field.
Unload the sample from balance's weighing pan
•
All samples weighed afterwards are compared with the reference mass,
•
and the display indicates the difference, expressed in [%], for each
weighed sample in relation to the reference mass.
PROCEDURE 3 – selecting a product from Database of Products
Press < Database of Products> soft key, select a product entry to be
•
weighed from a list of displayed products
On selecting, the grey coloured workspace automatically updates its
•
content with data on Reference Mass
Mass of the weighed product is automatically inserted in field: reference
•
mass, which is activated by pressing <
The display indicates 0.00 % (if the weighing pan is unloaded)
•
All samples weighed afterwards are compared with the reference mass,
•
and the display indicates the difference, expressed in [%], for each
weighed sample in relation to the reference mass.
Set as 100%> soft key;
> key
- 69 -
Give reference mass> soft key;
Database of Products> soft
Set as 100%> soft
> soft key