Parts Counting - RADWAG UYA 3Y User Manual

16. PARTS COUNTING

Working mode <
parts (objects) with equal part mass. Counting is based on determined mass
of a single part, which is:
o determined from a reference quantity of parts
o acquired from database of products
o inserted manually as a numeric value
Working mode activating procedure
while in the main window, press
•
display, which opens a submenu <Working modes> with selection of
available working modes,
select < Parts counting> mode, the software automatically returns to the
•
main window and displays
The grey coloured workspace contains the following data:
o Gross
o Standard mass
o Low threshold
o High threshold
o Target value
On selecting the parts counting mode, the display contains the
following quick access keys in the bottom bar:
1. Setup – access to balance's menu
2. Print header – print of data declared in the header
3. Print footer – print of data declared in the footer
4. Database of products – selection of products from corresponding
database
5. Give mass of 1 part – editing field for inserting mass of a single part
6. Set mass of 1 part – setting mass of a single part from optional number
of parts, e.g.: from 10 pcs, 20 pcs, 75 pcs, etc.
Parts counting> enables determining quantity of small
pictogram in the upper bar.
- 56 -
soft key located in the upper bar of the