In the course of parts quantity determination before
confirming the declared quantity value it is necessary to wait
for a stable measurement,
22. WORKING MODE – +/- CONTROL
+/- control is a working mode enabling you to enter checkweighing thresholds
values (Min, Max).
22.1. Local Settings
To go to local settings enter <3.3.HiLo> submenu.
Working mode accessibility
3.3.1.Acc
Save mode
3.3.2.Snn
Time interval
3.3.3.Int
Lo threshold
3.3.4.Lo
22.2. Declaring Checkweighing Thresholds
• Enter <HiLo> working mode (+/- control), first, text <SEt Lo> is displayed
for 1 s, next, window for declaring low weighing threshold (Min).
• Enter respective value and press
is displayed for 1 second, next, window for declaring high weighing
threshold (Max).
• Enter respective value and press
mode's home screen is displayed along with declared threshold value,
where:
Load mass lower than low weighing threshold.
Min
Load mass within weighing thresholds.
Ok
Load mass greater than high weighing threshold.
Max
If the entered low threshold value (Min) is greater than high
threshold value (Max), <Err Lo> error is displayed.
.
For detailed description read section 19.2.1.
For detailed description read section 19.2.2.
For detailed description read section 19.2.3.
For detailed description read section 19.2.4.
key to confirm, first, text <SEt Hi>
key for confirmation, working
- 38 -