Communication; Rs 232 Port Settings; Ethernet Port Settings; Tcp Protocol Settings - RADWAG 3Y Series User Manual

30. COMMUNICATION

Menu Communication is located in a menu group Parameters. It is accessed
by pressing Setup key or <
communicating with peripheral devices through the following ports:
COM 1 (RS232),
•
COM 2 (RS232),
•
Ethernet,
•
Tcp.
•
The ports are configured in group of parameters <
Enter submenu <
Communication" filed.

30.1. RS 232 port settings

Procedure:
− Select communication port <
− Set appropriate values
The RS 232 ports enable the following setting of transmission parameters:
• Baud rate
• Data bits
• Stop bits
• Parity

30.2. ETHERNET port settings

Procedure:
− Select communication port <
• DHCP
• IP Address
• Subnet mask
• Default gate
Caution:
Above settings are for information purpose only. Transmission parameters should be
selected in accordance with the settings of client's local network.
To carry out changes in the settings, press
<to make changes effective, restart the balance>,
Return to weighing mode and restart the device.

30.3. TCP protocol settings

TCP, i.e.Transmission Control Protocol
The TCP operates in client-server mode. The server pends for establishing a
Setup > quick access key. The balance enables
Communication> by pressing
COM1> or <
- 4800, 9600, 19200, 38400, 57600, 115200 bit/s
- 5, 6, 7, 8
- None, 1, 1.5, 2
- None, Odd, Even, Marker, Interval
Ethernet> and set appropriate values:
- Yes – No
- 192.168.0.2
- 255.255.255.0
- 192.168.0.1
enables communicating two computers.
- 183 -
Communication>.
key, and press "
COM2>,
key which displays a message: