When Unable To Send - Konica Minolta bizhub 600 User Manual

Transmission
3.6

When Unable to Send

When Unable to Send
When you are unable to send a FAX due to a line trouble or the like, a screen
to check the redial is displayed.
1
Press [OK].
– Redialing starts after the set time has elapsed.
– In case that no transmission can still be made even when redialed,
a screen is displayed in which you can check that the job was not
successfully completed.
2
Press [OK].
To delete a job of failed transmission, press the [Job List] and delete
that job.
Redialing
Redialing refers to dialing the number of the same destination again.
If a facsimile cannot be sent due to a busy signal from the receiving machine
or for some other reason, the machine redials the number after a predeter-
mined amount of time has elapsed. During that interval before the number is
redialed, the transmission document is treated as a reserved document wait-
ing to be sent.
!
Detail
The redialing function is set at factory to redial one time after a three-
minute interval. The number of redials and the redialing interval can be
changed in the Utility Mode. For details, see "Telephone Line Settings"
on page 11-26.
bizhub 750/600
3
3-29