Using The Touch Panel Controller - Christie CP2000-X User Manual

3.5 Using the
Touch Panel
Controller
TPC Main Menu 
CP2000-X User Manual
020-100031-01 Rev . 1 (03-2009)
Touch Panel Controller software resembles other Windows-based applications, but
is activated by touching locations on the TPC screen itself.
Touch large "raised" rectangular buttons to activate a function such as turning the
lamp or shutter on or off, or to start a presentation, or select a different icon. Buttons
may include text and/or an icon.

To log on/off as a different user, touch the user icon in the bottom right corner.

To go to a new menu, touch its tab at the top of the page.

To go to a submenu, touch its tab located above the status bar.

To see more options in pull-down menus, touch

To select an option in a list, touch the option text.

To begin entering text such as serial numbers, touch the entry box.

To "escape" without change from a pull-down list, touch menu background.

Leaving a menu automatically saves its current settings

Touch checkboxes to toggle on or off.

Touch to jump to the Status menu at any time.
All TPC menus and functions are illustrated and explained below.
NOTES: 1) Shown are SAMPLE menus—your specific text and/or icons may vary
according to settings recorded in the password-protected menus. By default, the
Main menu offers 32 pre-configured channels. 2) If necessary, adjust TPC screen
brightness and contrast via the Windows CE Display Settings for this device (service
password required). If your TPC is enclosed in a blue casing, use the small knob on
the back of the unit to adjust screen settings.
NOTE: Using the small Status and User buttons in the bottom corners does not affect
the projected display image.
Figure 3.3. Main Menu Functions
BASIC OPERATION
.
3-9