Christie CP2000-X User Manual page 121

CP2000-X User Manual
020-100031-01 Rev . 1 (03-2009)
8.2 Rest the anode (+) end of the lamp on the lamp cradle as shown in Figure 6.1,
right, and slip the positive lamp connector over the bulb end.
8.3 Tighten setscrews in both negative and positive lamp connectors (Figure 6.2).
Figure 6.2. Secure bulb at cathode (–) and anode (+) connectors
IMPORTANT: Proper electrical contact prevents resistance in the lamp connectors.
If you accidentally touch the quartz body of the lamp with your bare hands, clean it
as described in 6.3, Maintenance and Cleaning.
Figure 6.1. Install Bulb
MAINTENANCE
6-9