Cinema Inputs; Control Ports; Touch Panel Controller - Christie CP2000-X User Manual

SPECIFICATIONS
Cinema Inputs 
Non-cinema DVI Inputs 

(FOR ALTERNATIVE CONTENT)
Control Ports 
Touch Panel Controller 
Power Specifications 

8-2
Number of inputs
Standard supported
Connector Type
* NOTE: Currently supported cinema formats are listed on page 4-2.
Number of inputs
Standard supported
Connector Type
* NOTE: Currently supported DVI formats (i.e., non-cinema formats) are listed on page 5-2.
RS-232 connectors (2): 9-pin D female
Ethernet connectors (2): RJ-45 female
GPIO connector (1): 37-pin D female
TPC connector ((1): 6-pin XLR
Ballast Control Port (1): 9-pin D male
(for ballast only)
Ballast Interlock Port (1): 9-pin D female
(for ballast only)
Type of Display
Integrated Operating System
Communication Interface w/CP
Power Requirement
Current Rating
Interface Connector
Memory
Projection head
Projection Compartment AC
Connector type & rating
Voltage range, nominal
Line frequency, nominal
AC input rating
Max. inrush current
Max. current consumption*
Max. power consumption*
Lamp (DC)
Max. operating voltage
Max. start-up voltage
Max. current consumption
Max. power consumption
Connector type
* With extractor
2
SMPTE 292M bit-serial
BNC
2
VESA Digital Visual Interface (DVI-D)
24-pin female DVI-D
A= Non-ASCII PC communication
B=Christie-proprietary accessories only
Std. 100 base-TX, 100 Mbps max.
Refer to Figure C.1 and Figure C.2
See Touch Panel Controller, below.
RS-232, w/proprietary protocol
+5V TTL-compatible, opto-isolated at
ballast end.
5.7" diag. color LCD, backlit
Microsoft Windows
10BaseT Ethernet
.05 A max., at 24 VDC ±10%
2.0 A max.
8-pin DIN, bayonet-locking
64MB
(near Panel B, at front)
(1) IEC 320-compatible, 10 A rating
200 – 240 VAC ±10%
50 – 60 Hz
10 A
35 A
*
3 A
700 W
46 VDC
155 VDC
180 A
6600 W
Female CAM Lock receptacle (+red)
Male CAM Lock receptacle (–black)
®
CE
CP2000-X User Manual
020-100031-01 Rev. 1 (03-2009)