Christie CP2000-X User Manual page 53

CP2000-X User Manual
020-100031-01 Rev . 1 (03-2009)
operation. These indicators can change to indicate a warning (yellow) or
critical error (red) status, which triggers the same warning light on the status
bar and at the main
PROJ STATUS

Yellow Warning indicates an unusual environmental condition. For example, a
temperature may be elevated and nearing its upper limit—correct the problem by
checking all cooling systems, turning off the projector and cooling if necessary
(make sure to follow the standard shut-down procedure). Service may be required
in some cases.

Red Error indicates that 1) the environment has a serious problem or 2) a
specific electrical component is not detected or does not appear to be functioning
properly. In some cases, a module may need re-seating. In other cases, service or
replacement of a module may be required before the projector can resume normal
operation. Regardless, a red indicator requires immediate attention.

Diagnostics showing a "?" icon indicate an unknown status caused by a problem
during initialization. Try re-booting the projector.
In addition, a full-screen flashing red alarm window appears on the TPC for failed
interlocks (mandatory), over-temperature (optional), and fan problems (optional).
light on the rear of the projection head.
BASIC OPERATION
3-11