Christie CP2000-X User Manual page 52

BASIC OPERATION
To toggle the lamp on/off, press and hold the lamp
TURN THE LAMP ON or OFF:
button.
By default with no login, the TPC will offer only the three general user
LOG ON:
menus intended for daily operation (refer back to Figure 3.2). To access other menus,
you must log on as a specific user with more rights. Press the user level icon in the
bottom right corner of any screen, then enter the desired user name and password in
the text boxes provided.
To blank the display for instant picture
OPEN or CLOSE THE DOUSER (SHUTTER):
muting and cooler stand-by mode, press the "raised" douser (shutter) key showing a
lens that is currently projecting light. Closing the douser slides a shutter blade in
front of the lens and reduces lamp power to 50% of its maximum rating (or 75% if
using a 2 kW or 3 kW lamp). To open the douser and restore previous lamp power,
press the "depressed" douser key currently showing a darkened lens with red warning
circle.
: toggle the current location of the optional auxiliary lens:
MOVE THE AUXILIARY LENS
position it either in front of the primary lens to stretch the display horizontally, or
move it aside.
NOTE: for complete operating instructions, refer to the information supplied with the
Motorized Auxiliary Lens Mount.
To display a test pattern, press the Test Pattern button—repeat
SEE TEST PATTERNS:
to cycle through available test patterns. To return to a presentation, toggle the Test
Pattern button again or select one of the 32 channel buttons.
NOTES: 1) Allow 2-3 seconds for each test pattern to appear. 2) The number and
type of available test patterns depends on what the installer loaded during
installation. 3) Any user beyond the General User can also choose from the complete
range of test patterns offered in the password-protected Advanced menu.
To start a different feature or presentation,
START FEATURES or PRESENTATIONS:
press its corresponding channel button.
TPC Status Menu 
NOTE: The Status:System menu described here is available to all users. For
information about the password-protected Status:Server, Status:Diag and
Status:Interrogator menus, please see 3.10, Working With Servers and Diagnostics.
Sample views of the Status:System menu are shown in Figure 3.4. Navigate the
Status menu as you would Windows Explorer or File Manager, expanding or
compressing directories as desired by pressing the corresponding small square
buttons. To see more of the Status menu, drag the scroll bar up or down. This menu
updates approximately every 30 seconds.
As shown in Figure3.4, this blue symbol identifies basic
INFORMATION INDICATORS:
informative data describing the source connection, as well as certain non-critical
historical/operational facts about the projector and lamp. Such data does not trigger
warnings or error conditions.
The small colored indicators or "virtual
ENVIRONMENT / DIAGNOSTIC INDICATORS:
LEDs" for environmental and diagnostic information are green during normal
3-10 CP2000-X User Manual
020-100031-01 Rev. 1 (03-2009)