3.1
Projector
Basics
Components/Features
CP2000-X User Manual
020-100031-01 Rev . 1 (03-2009)
This section describes how to use the projector once it is properly installed, by a
qualified service technician, as described in Section 2, Installation and Setup.
Chief CP2000-X components are identified and explained below.
Figure 3.1. Basic Projector and Related Components
Air Filter
Intake air flows through the filter before circulating in the front compartment to cool
the main electronics. Replace the air filter whenever the lamp is replaced—or sooner
in dusty/dirty environments. Check filter condition monthly. See 6.4, Replacing the
Lamp & Filter for complete instructions.
Basic Operation
S e c t i o n 3
3-1