Christie CP2000-X User Manual page 114

MAINTENANCE
AC / Power Precautions 
Lamp Precautions 
6-2
Position all cables where they cannot contact hot surfaces or be pulled or
This projector must be operated in an environment that meets the operating range
specifications in Section 8, Specifications.
Opening or removing a projector cover requires a
Do not attempt operation if the AC supply
is not within the specified voltage range.
Do not allow anything to rest on the power cords. Place the projector in a location
where the cords cannot be abused by persons walking on them or objects rolling over
them. Never operate the projector if a power cable appears damaged in any way.
Do not overload power outlets and extension cords as this can result in fire or shock
hazards.
Note that only qualified service technicians are permitted to open any enclosure on
the product, and only if AC has been fully disconnected from the projection head
and ballast.
SHOCK HAZARD. Disconnect projection head and
ballast from AC before opening any enclosure.
Xenon arc lamps are under high pressure and must be handled with great care at all
times. Lamps may explode if dropped or mishandled.
Wear Protective Clothing
Never open the lamp door unless you are wearing authorized protective clothing such
as that included in a Christie Protective Clothing Safety Kit #598900-095.
Recommended protective clothing includes—but may not be limited to—protective
gloves, latex lab gloves, double-layer 0.040" acetate face shield, and a quilted
ballistic nylon jacket or a welder's jacket.
EXPLOSION HAZARD —Wear authorized protective
clothing whenever the lamp door is open!
Never attempt to remove the lamp directly after use. The lamp is
under increased pressure when hot and may explode, causing
personal injury and/or property damage.
NOTES: 1) Christie's protective clothing recommendations are subject to change. 2)
Any local or federal specifications take precedence over Christie recommendations.
WARNING
tripped over.
WARNING
qualified service technician.
WARNING
WARNING
WARNING
WARNING
Allow to cool completely.
CP2000-X User Manual
020-100031-01 Rev. 1 (03-2009)