D Repacking The Projector - Christie CP2000-X User Manual

CP2000-X User Manual
020-100031-01 Rev. 1 (03-3009)
Repacking the Projector
If you need to relocate or ship the CP2000-X, repack the projection head with the
original packing materials used for shipping.
Figure D-1. Packing the Projection Head
1. Set the plastic base on the pallet. Set foot braces aside.
2. Extend feet to clear the bottom of the projector by approximately 1 inch or more.
3. Place the projection head on the plastic base with lens nearest the larger front
area as shown in Figure D.1.
4. Lift projection head slightly and slide in foot braces fully to nearest stop.
5. Align feet to braces (Detail A), and secure braces with bolts at retaining plates.
6. Add remaining packaging sleeve and foam-lined lid. Strap all together.
A p p e n d i x D
D-1