Christie CP2000-X User Manual page 101

TPC Interrogator Menu
CP2000-X User Manual
020-100031-01 Rev . 1 (03-2009)
The password-protected Status:Interrogator screen enables the collection of

advanced-level status information that can assist in the diagnostics of projector
components. Interrogator can be run in two modes and enables the collection of log
files only (Basic Mode) or log files plus registered batch files (Enhanced Mode).
These files are then stored on the TPC's storage card. For Interrogator to
successfully retrieve these diagnostic files, the projector must remain in its "failed"
state (with incorrectly displayed image on screen).
NOTES: 1) Always run Interrogator first before power cycling the projector,
otherwise important diagnostic files will be unusable. 2)
during a show as this could cause image disruption. 3) Interrogator is also
accessible through a separate login and password (different from the service login).
Contact Christie tech support for assistance and password.
Figure 3.44. Status: Interrogator Menu
BASIC OPERATION
Never run Interrogator
3-59