Shu-Shutter; Sin-Select Input - Christie Crimson Technical Reference

Examples
Set port to Login Required:
(RAL+PRTC 1)
SHU–Shutter
Opens and closes the shutter.
The command can also be used check if the shutter is currently opened or closed. It can also return an
incorrect result if the shutter was manually opened or closed.
Commands
Command Description
SHU? Gets the state of the shutter. (Read-only)
SHU <0 | 1> Opens or closes the shutter.
Examples
Get the state of the shutter:
(SHU?)
Result:
(SHU!0)
Indicates the shutter is open.
Open the shutter:
(SHU 0)
Close the shutter:
(SHU 1)
SIN–Select Input
Selects the active input.
Commands
Command Description
SIN?L Returns a list of available inputs to select based on the
selected port configuration. (Read-only)
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
—
0 = Opens the shutter
1 = Closes the shutter (Default)
Values
—
44