Sin-Select Input; Snm-Snmp Configuration - Christie Boxer 30 Technical Reference

SIN–Select Input
Selects the active input.
Commands
Command Description
SIN?L Returns a list of available inputs to select based on the
selected port configuration. (Read-only)
SIN <input> Selects a set of inputs based on the selected port
configuration. This command is only available if video
electronics are on. (Saved value)
SIN+PORT <config> Select an input port configuration to use. This command
is only available if video electronics are on. (Saved
value)
Examples
Return a list of available inputs:
(SIN?L)
Use one port to display an image:
(SIN+PORT 1)
SNM–SNMP Configuration
Configures SNMP support for the projector.
Commands
Command
SNM+LAMP <0 | 1>
SNM+LIFE <0 | 1>
SNM+POWR <0 | 1>
SNM+READ "<password>"
SNM+SIGN <0 | 1>
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Enables or disables light source
faults. (Saved value)
Enables or disables light source
life limit warnings. (Saved value)
Enables or disables power state
changes. (Saved value)
Sets the password for SNMP
notifications. (Saved value)
Enables or disables video signal
changes. (Saved value)
Serial API commands
Values
—
input = Subject to the range
returned in SIN?L
1 = One-Port (Default)
Values
0 = Disables light source faults
1 = Enables light source faults (Default)
0 = Disables light source life limit warnings
1 = Enables light source life limits (Default)
0 = Disables power state changes
1 = Enables power state changes (Default)
password = String value, maximum 32
characters
Default password = private
0 = Disables video signal changes
1 = Enables video signal changes (Default)
54