Setting The Frame Delay; Configuring The Video Settings; Adjusting Black And White Video; Adjusting The Color Balance - Christie HS 2K Series User Manual

Setting the frame delay

Adjust the frame delay which eliminates the odd colors and cross talk caused by timing difference.
Frame delay is the time difference between the first 3D signal being given and the result being
executed from current projector.
1. Select Menu > Image Settings > 3D Display > Frame Delay.
2. Adjust the slider by arrow keys or select ENTER to input the value.
3. After inputting the value, select ENTER to apply.

Configuring the video settings

Configure the video settings to optimize the image performance, such as applying color to black and
white videos, reducing luminance component noise, and so on.

Adjusting black and white video

Adjust a video image from black and white to fully saturated color. This feature is for video sources
only.
1. Select Menu > Image Settings > Video Options > Color.
2. Adjust the slider by arrow keys or select ENTER to input the value.
3. After inputting the value, select ENTER to apply.

Adjusting the color balance

Adjust the red-green color balance in NTSC video images. NTSC, named after the National
Television System Committee, is the analog video color system used in North America and most of
the South America countries. This feature is for NTSC video sources only.
1. Select Menu > Image Settings > Video Options > Tint.
2. Adjust the slider by arrow keys or select ENTER to input the value.
3. After inputting the value, select ENTER to apply.

Adjusting the skin color

Adjust the color tone of human skin in videos.
1. Select Menu > Image Settings > Video Options > Skin Color.
2. Select appropriate skin color tone.
3. To confirm the selection, select ENTER.
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image settings
40