Setting The 3D Sync Output Signal; Setting The Frame Delay; Setting The Sync Delay - Christie Inspire Series User Manual

• Auto—If an external 3D sync input is detected, the projector uses automatically the
external sync input. If no external sync input is detected, the projector uses the internal
3D sync to display the content.
For multi-threaded applications, if the 3D enable function is set to Frame Sequential,
Christie recommends to connect the source device to the projector using 3D Sync In
port. The Frame Delay function makes sure a synchronized display for multiple
projectors.
• Internal—The projector generates the 3D sync internally and content is displayed.
• External—The projector uses an external 3D sync input to display the content.
3. To confirm the selection, select ENTER.

Setting the 3D sync output signal

This function is used for controlling and processing the 3D sync output signal.
1. Select Menu > Image Settings > 3D Display > 3D Sync Out.
2. Select the appropriate 3D sync out setting.
• To Emitter—If the 3D sync out port is connected to an emitter, select To Emitter to
transmit 3D signal to emitter and give to 3D glasses.
• To Next Projector—Multiple projectors 3D application only. Select To Next Projector
when the 3D sync out port is not connected to an emitter.
3. To confirm the selection, select ENTER.

Setting the frame delay

Adjust the frame delay which eliminates the odd colors and cross talk caused by timing difference.
Frame delay is the time difference between the first 3D signal being given and the result being
executed from current projector.
1. Select Menu > Image Settings > 3D Display > Frame Delay.
2. Adjust the slider by arrow keys or select ENTER to input the value.
3. After inputting the value, select ENTER to apply.

Setting the sync delay

Adjust the sync delay which eliminates the odd colors and cross talk caused by timing difference.
Sync delay is the time difference between the first 3D signal being given and the result being
executed from the current projector.
1. Select Menu > Image Settings > 3D Display > Sync Delay.
2. Adjust the slider by arrow keys or select ENTER to input the value.
3. After inputting the value, select ENTER to apply.
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image settings
38