Correcting For Ambient Light; Setting The Frame Delay; Adjusting The Image Sharpness - Christie Boxer 4K30 User Manual

• HD Video—Set the output color to a specific standard value. Adjusts the colors red,
green, blue, and white.
• Custom—Select a user defined set of color adjustments.
3. Select Enter.

Correcting for ambient light

Ambient light is the natural light that occurs in the environment where the projector is located.
1. Select MENU > Image Settings > Color & Gamma > Ambient Light Correction.
2. Select Enter.
3. Use the right and left arrows to adjust how the image displays in conditions with ambient light.
4. To confirm your selection, select Enter.

Setting the frame delay

Delays the output signal timing relative to the input signal timing by a fraction of a frame, and up to
several frames. The minimum latency can vary based on the amount of scaling applied to the
image. When using keystone or warping, an additional latency is required, depending on the
amount of warp.
1. Select MENU > Image Settings > Advanced Image Settings > Frame Delay.
2. To set the frame delay, select Set Delay.
3. Adjust the value and to confirm your selection, select Enter.
4. To set the achievable frame delay, select Actual Delay.
5. Adjust the value and to confirm your selection, select Enter.

Adjusting the image sharpness

Lower settings can improve a noisy signal. Setting the sharpness above the halfway point can
introduce noise in the image.
1. Select MENU > Image Settings > Advanced Image Settings > Sharpness.
2. Select Enter.
3. Use the right and left arrows to adjust the sharpness of the image.
4. To confirm your selection, select Enter.
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
Adjusting the image
21