Using With A Peer To Peer Connection - Icom VE-PG2 Instruction Manual

3
CONVERTER MODE APPLICATION

■ Using with a peer to peer connection

When the VE-PG2's "VoIP call destination setting" is set to "Peer to Peer call," you
can communicate between the IP telephone and transceiver 2 without registering
the VE-PG2 to the IP router.
NOTE:
• "Peer to Peer call" is useful when you construct the system to use two or more VE-PG2s, be-
cause of "Peer to Peer call" has no effect on IP router's extension number registrations.
• The IP telephones must be compatible with a peer to peer connection.
Other transceivers
Transceiver 2
(Operator A)
Turn ON the transceivers' power,
and then set transceiver 1's
volume control to the 12 o'clock
position.
50
CAUTION:
To connect the transceivers or repeaters, use only the following cables:
OPC-2073 (For the transceivers) or OPC-2074 (For the repeaters).
Connect the specified cables to only [TRX1], [TRX2] or [TRX3].
Using another cable, like an Ethernet cable, may damage the VE-PG2,
transceivers or repeaters.
SIP URI: sr53V@192.168.0.3
[TRX1]
Own SIP URI: pg2@192.168.0.2
Connect to transceiver 1's speaker jack.
Transceiver 1
[TRX1]
IP router
192.168.0.3 extension number: 201
To the [LAN] port
1 2
VE-PG2
HUB
192.168.0.2
NOTE: First, connect the transceiver
to the VE-PG2 using the optional
OPC-2073. Then turn ON the power
to the transceiver and the VE-PG2.
IP telephone
(Operator B)
Connect to
unused ports
3 4 5