Ip Network Connection Emergency Notice - Icom VE-PG2 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
■ Connection setting (Continued)

6-6 IP network connection Emergency notice

ï VoIP call destination setting
Set the IP network type to send calling signals from transceivers that are connected
to the emergency device.
Place the mouse pointer on "Connection setting," and then on "IP network connec-
tion," and then click "Emergency notice" shown on the list.
Select either SIP server transmit or Peer to Peer call as the IP network type, and
enter either the phone number into "Phone number" or SIP URI into "SIP URI."
q SIP server transmit
The transceivers that are connected to the emergency device send the calling signal
to the IP router, and the IP router sends the signal to the IP telephone's phone num-
ber, which is set in the VE-PG2's "Phone number."
w Peer to Peer call
The transceivers that are connected to the emergency device send the calling signal
to the SIP URI, which is set in the VE-PG2's "SIP URI."
Also, input your own SIP URI into the "Peer to Peer connection setting." (p. 50)
258
q
w