Extension Settings For The Transceiver Controller Telephone Connection - Icom VE-PG4 Installation Manual

4
CONFIGURING THE PBX SYSTEM

Extension settings for the transceiver controller telephone connection

PBX > Extension
Assign the extension number for communicating between the telephone and a transceiver that is linked to the VE-PG4.
1
Open the Extension screen.
(PBX > Extension)
2
In [Extension], set Port Type to "Transceiver Controller Telephone Connection," enter Name and
Extension Number (2 ~ 7 digit,) and then click <Apply>.
3
Confirm the entry in [List of Extension Entries].
Example: Calling the wireless LAN transceiver (0101) from the SIP phone (extension 31)
VE-PG4
Transceiver Controller
Telephone Connection
Extension Number: 3000
Extension Number : 31
Pick up the SIP phone handset, and then dial [the extension number of the transceiver controller telephone
connection], [Transceiver Call Prefix], and [Unit ID]. (Example: 3000*101)
KX series KX series
Extension Number : 32
Example: AP-95M
(Wireless LAN access point)
IP100H
100H-101 100H-102 100H-103
0101 0102
4-7
q Enter
w Click
Confirm
192.168.0.50
IP100FS
0050
IP100FS
(Remote communicator)
0103