Connection Setting; Operating Mode - Icom VE-PG2 Instruction Manual

6
CONVERTER MODE SETTING SCREEN

■ Connection setting

6-1 Operating mode

ï Operating mode setting
Set the VE-PG2's operating mode.
Place the mouse pointer on "Connection setting," and then click "Operating mode,"
shown on the list.
If you communicate between the IP telephone and the transceiver, set the VE-PG2's
operating mode to "Converter mode."
(Default: Bridge mode)
• Connect transceivers or repeaters to the [TRX1]–[TRX3] ports using the OPC-
2073 or OPC-2074.
236