Troubleshooting - Icom VE-PG2 Instruction Manual

8
REFERENCE

■ Troubleshooting

If the VE-PG2 seems to be malfunctioning, please check the followings before
sending it to the service center.
Problem:
Possible cause1 : No AC adapter is connected to the VE-PG2.
Solution
Possible cause2 : The AC adapter is connected to the same AC outlet with the PC.
Solution
Problem:
Possible cause1 : The Ethernet cable is not properly connected to the VE-PG2.
Solution
Possible cause2 : The HUB or PC is turned OFF.
Solution
Problem:
Possible cause1 : The PC's IP address is incorrect.
Solution
Possible cause2 : The network part of PC's IP address is different from the
Solution
Possible cause3 : A proxy server is used for the web browser setting.
Solution
330
The [POWER] indicator does not light.
: Properly connect the AC adapter to the VE-PG2.
: Connect the AC adapter to a different AC outlet.
The [LAN] indicator does not light.
: Properly connect the Ethernet cable to the VE-PG2.
: Turn ON the HUB or PC.
You cannot access the VE-PG2's setting screen.
: Set the fixed VE-PG2's IP address after you set the VE-PG2 to
default setting.
VE-PG2.
: Set the network part of PC's IP address to same as the VE-PG2.
: Set the web browser's proxy server setting to OFF.
Click the "Tools" in the web browser menu, and then click
"Internet option."
Click the "Connections" tab, and click [LAN settings], and then
confirm there is no check mark in "Automatically detect settings"
and "Use a proxy server for your LAN (These settings will not
apply to dial-up on VPN connection).