Voip Call Detail Transceiver 1 (Trx1) - Transceiver 3 (Trx3) - Icom VE-PG2 Instruction Manual

5
SELECTIVE CALL MODE SETTING SCREEN
■ Connection setting (Continued)
5-8 VoIP call detail Transceiver 1 (TRX1) – Transceiver 3 (TRX3)
ï VoIP call detail setting
Set the detailed settings for each transceiver connected to the [TRX1]–[TRX3] ports,
when it receives a signal.
Place the mouse pointer on "Connection setting," then on "VoIP call detail," and then
click on one of the Transceiver ports, TRX1, TRX2 or TRX3 shown on the list.
q w
q Send connect success tone to VE-PG2:
Select the desired notice tone type or "Not use."
The selected notice tone sounds before the communication starts.
If "Not use" is selected, no tone sounds.
(Default: Notice tone 1)
Selectable from Not use, Notice tone 1, Notice tone 2 or Notice tone 3.
w Notice tone volume:
Set the notice tone volume level.
(Default: 0)
(Selectable range: –18 to +6 (dB), 1 dB steps)
204