Icom VE-PG2 Instruction Manual page 251

r SIP service domain
Enter an IP router domain of up to 63 alphanumeric characters.
NOTE: Enter the same domain in the IP router.
t User ID
Enter an IP router connection user ID of up to 63 alphanumeric characters.
y Password
Enter an IP router connection password of up to 63 alphanumeric characters.
u Calling number notice
Set the Calling number notice function to Disable or Enable. This function sends
your IP phone number to the calling target.
Disable : The IP router does not send your IP phone number to the calling target.
Depending on the IP telephone, your IP phone number may send to the
calling target even if you set this function to "Disable."
Enable : The IP router sends your IP phone number to the calling target.
(Default: Enable)
i Registration expiry
Enter the IP router's expiration time of the registration between the VE-PG2 and the
IP router.
If the VE-PG2 does not connect to the IP router before the Registration expires, the
IP router will remove the registration with the VE-PG2.
(Default: 600 seconds)
(Selectable range: 600 to 28800 seconds)
o Retry register timer
Enter the interval time for sending a registration request from the VE-PG2 to the IP
router.
The time to send a registration request interval is a percentage of the Registration
expiry, as set in i above.
Set a percentage between 10% and 90% of the value of the Registration expiry into
the Retry register timer, "Normal" cell.
If the VE-PG2 does not make a successful registration, it again sends a connection
registration request to the IP router.
The connection registration request sending interval is a percentage of Registration
expiry, as set in i above.
Set a percentage between 10% and 90% of the value of the Data retention time into
the Retry register timer "Exception" cell.
(Default: Normal: 50 %, Exception: 50 %)
CONVERTER MODE SETTING SCREEN
6
1
2
3
4
5
6
7
8
9
10
11
251