Connect With The Ve-Pg2 Using Telnet - Icom VE-PG2 Instruction Manual

8
REFERENCE

■ Connect with the VE-PG2 using Telnet

ï For Windows XP user
q Start up Windows.
w Click the [Start] button, and then click [Run...].
Input "Telnet.exe" to the textbox, and then click <OK>.
e The telnet screen appears, then input "open" and VE-PG2's IP address (example:
192.168.0.1).
r Input login ID and password, then push [Enter].
Login ID : Input "admin" (Fixed)
Password : Input the VE-PG2's
administrator password
t If the telnet can access to the VE-PG2, "VE-PG2 #" is displayed on the telnet
screen.
ï For Windows Vista or Windows 7 user
q Start up Windows.
w Click the [Start] button, and click [Control panel], then [Programs].
e Click "Turn Windows features on or off" in "Programs and Features."
r Click the "Telnet Client" check box.
t Go to step e in "For Windows XP user."
ï About telnet command
The VE-PG2 displays the telnet command list to the telnet screen when pushing the
[Tab] key.
The sub command list is displayed on the telnet screen when you push the [Tab]
key after inputting the telnet command.
• Convenient function to input the telnet command.
After inputting first few characters of the command name, push the [Tab] key. The rest of the
characters of the command name are automatically input.
(Example) If you input "s" and push the [Tab] key, "save" will be displayed on the telnet screen.
If there are several possible commands, all of them are displayed.
(Example) If you input "res" and push the [Tab] key, "reset restart" will be displayed on the
telnet screen.
332