Using With An Emergency Device And The Microphone - Icom VE-PG2 Instruction Manual

■ Using with an emergency device and the
microphone
When you set the external microphone's switch to ON, you can make an emergency
announcement with the external microphone, and the announcement is output to
the external Public Address device and transceiver 2 via the VE-PG2.
• Transceiver 2 can communicate with other transceivers.
• You can also make an announcement (using an in-house sound system) from Transceiver 2.
Other transceivers
Transceiver 2
Transceiver 1
[TRX1]
Extension number: 301
Password: c8d0zp6
Turn ON the transceivers' power,
and then set transceiver 1's
volume control to the 12 o'clock
position.
CONVERTER MODE APPLICATION
CAUTION:
To connect transceivers or repeaters, use only the following cables:
OPC-2073 (For the transceivers) or OPC-2074 (For the repeaters).
Connect the specified cables to only [TRX1], [TRX2] or [TRX3].
Using another cable, like an Ethernet cable, may damage the VE-PG2,
transceivers or repeaters.
Extension number: 85
Password: omp63yg
Public Address device
[TRX1]
VE-PG2
192.168.0.2
Connect to transceiver 1's speaker jack.
NOTE: First, connect the transceiver
to the VE-PG2 using the optional
OPC-2073. Then turn ON the power
to the transceiver and the VE-PG2.
External
Switch
[OUT]
[SW]
IP router
192.168.0.3
3
Extension number: 99
Password: 4wk66g4
(Operator A)
External
microphone
[IN]
To the [LAN] port
Connect to
unused ports
1 2 3 4 5
HUB
IP telephone
extension number: 201
(Operator A)
1
2
3
4
5
6
7
8
9
10
11
95