System Setting; Administrator - Icom VE-PG2 Instruction Manual

6
CONVERTER MODE SETTING SCREEN

■ System setting

6-20 Administrator

ï Change Administrator's password
Modify the administrator password.
Place the mouse pointer on "System setting," and then click "Administrator" shown
on the list.
q
w
e
r
q Administrator ID
Displays the administrator login ID.
• The ID is fixed to "admin," and you cannot change it.
w Current password
Input the current password, if you want to change it.
(Default: wavemaster)
• Case sensitivity on.
e New password
Input a new password.
• Case sensitivity on.
r Confirm password
Input the programmed new password again to confirm.
[NOTE]
If you forget the administrator password, you must reset (initialize) the VE-PG2.
To reset, see "How to initialize the VE-PG2" for details. (p. 322)
• When you reset (initialize) the VE-PG2, all settings are reset to the initial default values.
308