Snmp - Icom VE-PG2 Instruction Manual

6-23 SNMP

ï SNMP Setting
Set the SNMP (Simple Network Management Protocol) when you monitor the proto-
col, to automatically monitor using the SNMP monitor.
Place the mouse pointer on "System setting," and then click "SNMP" shown on the
list.
q
w
e
r
q Use SNMP
Select whether to enable or disable the SNMP monitor function.
(Default: Enable)
• If you select "Enable," you can monitor the VE-PG2's information with the SNMP monitor.
w Community ID (GET)
Set an ID of up to 31 characters, which is required to access the SNMP monitor.
(Default: public)
e Location
Enter a location name of up to 127 characters to be displayed on the SNMP monitor.
• The SNMP monitor is compatible with MIB-II (RFC1213).
r Contact information
Enter a contact information of up to 127 characters to be displayed on the SNMP
monitor.
• The SNMP monitor is compatible with MIB-II (RFC1213).
CONVERTER MODE SETTING SCREEN
6
1
2
3
4
5
6
7
8
9
10
11
311