Icom VE-PG2 Instruction Manual page 256

6
CONVERTER MODE SETTING SCREEN
■ Connection setting
6-5 IP network connection EXT I/O (EXT) (Continued)
ï Peer to Peer connection setting
Set a SIP URI to communicate to the transceivers that are connected to the [IN}/
[OUT] port, Using with a peer to peer connection.
Place the mouse pointer on "Connection setting," and then on "IP network connec-
tion," and then click "EXT I/O (EXT)" shown on the list.
Enter a SIP URI for the transceivers connected to the [IN]/[OUT] ports.
• When you set "Choose call destination" to "Peer to Peer call" in "VoIP call destination setting,"
you must input "Own SIP URI" because the SIP URI is used for Peer to Peer calling.
• When you communicate between an IP telephone and transceivers using the VE-PG2's "Peer
to Peer call," you must register this SIP URI in the network equipment's settings.
NOTE: Enter a SIP URI in one of the following two ways:
sip: SIP user name@IP address (Example: A100@192.168.0.1)
sip: SIP user name@Host name.Domain name (Example: A100@ICOM.PG2)
• Input the SIP URI, up to 63 characters, and do not input a space.
• Use more than one alphabetical character for the SIP user name (Example: A100).
• If you enter a "host name.domain name" in the SIP URI (Example: ICOM.PG2), obtain the
domain name from a dynamic DNS service.
256