Icom VE-PG2 Instruction Manual page 34

2
SELECTIVE CALL MODE APPLICATION
■ Using with an emergency device (Continued)
Step 5 Setting the external output voice terminal
Place the mouse pointer on "Connection setting," and then on "TRX/EXT," and then
click "EXT Output (EXT OUT)" shown on the list.
Set the external device output gain.
• " Output gain (HW) " selection may differ depending on the connected external devices.
• The external amplifier may output a loud sound. If the output sound is too loud, set the
" Output gain (HW) " to " Minimum. "
34
Click to select "Standard"
option.
• Click [Save] after setting.